Direct-Mount Caliper
Bolts to the factory Fit / Jazz front knuckle. No brackets, no adapters.
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 5 - Jul 10
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
2009-2026 Honda Fit / Jazz WD4 Direct-Mount Front Big Brake KitDirect Mount Series Front Axle 4 Piston 2009 2026 Honda Fit Jazz WD4 Direct Mount Front Big Brake Kit Big brakes built for a small, momentum driven car. This TTSPORT Direct Mount Series front big brake kit is engineered specifically for the Honda Fit Jazz around the WD4 forged 4 piston caliper, a 262 mm 21 mm internally vented rotor, and vehicle specific brake line fittings. The factory front brakes work for stock pace, but once you add stickier
Direct-Mount Series · Front Axle · 4-Piston
2009-2026 Honda Fit / Jazz WD4 Direct-Mount Front Big Brake Kit
Big brakes built for a small, momentum-driven car. This TTSPORT Direct-Mount Series front big brake kit is engineered specifically for the Honda Fit / Jazz around the WD4 forged 4-piston caliper, a Ø262 mm × 21 mm internally vented rotor, and vehicle-specific brake line fittings.
The factory front brakes work for stock pace, but once you add stickier tires, run canyon roads, or push autocross laps, they become the limit. This kit raises that ceiling with a stiffer forged caliper, more piston area, a larger rotor, and a firmer pedal—without forcing you into a 17-inch wheel.
Why Honda Fit / Jazz Builders Choose the WD4
4-Piston Forged Clamp
WD4 forged 4-piston caliper with 38 mm pistons and 45.4 cm² total piston area per caliper.
Matched Rotor Mass
Ø262 mm × 21 mm vented disc gives a real heat sink without overloading the front suspension or wheel.
Vehicle-Specific Brake Lines
Three-layer SUS304 braided lines with PTFE liner and PVC sheath, fittings sized for both chassis and caliper.
Compact 15-Inch Package
Designed to clear common 15 in wheels with 42 mm minimum spoke clearance.
Two-Piece Forged Body
Stiffer than cast OE calipers, so pedal travel goes into the pads—not into caliper flex.
WD4 Direct-Mount Technical Specifications & Kit Options
| Brake Caliper | |
|---|---|
| Series | Direct-Mount Series |
| Model / Application | WD4 |
| Axle Position | Front |
| Piston Count | 4-piston |
| Piston Type | Aluminum-alloy pistons without dust boots |
| Piston Diameter | 38 mm × 4 |
| Caliper Dimensions | L 205 mm × W 110 mm × H 89 mm |
| Total Piston Area | 45.4 cm² per caliper, all pistons combined |
| Manufacturing Process | Two-piece forged aluminum body |
| Net Weight | 1.80 kg per caliper, without pads |
| Surface Finish | High-temperature gloss coating |
| Recommended Wheel Size | 15 in or larger |
| Recommended Rotor Size | Ø262 mm × 21 mm |
| Brake Rotor | |
| Rotor Material | Heat-treated high-carbon cast iron |
| Axle Position | Front |
| Rotor Dimensions | Ø262 mm × 21 mm |
| Construction | One-piece rotor |
| Ventilation | Internally vented |
| Rotor Mounting | Fixed |
| Directional Design | Yes — left/right specific |
| Rotor Face Pattern | Curved slot / Grain Slot |
| Brake Pads | |
| Compatible Rotor Material | Iron / steel rotors only |
| Operating Temperature Range | 0–600 °C |
| Average Friction Coefficient | Average μ: 0.38; variation depends on temperature, line pressure, and rotor condition |
| Lines | |
| Brake Line Construction | Three-layer reinforced construction |
| Brake Line Material | PTFE inner liner / SUS304 stainless-steel braid / PVC protective outer sheath |
| Brake Line Fittings | Vehicle-specific fittings; caliper-side and chassis-side fittings vary by application |
| Vehicle Application & Rotor Mapping | |
| 2009-2014 Honda Fit / Jazz (GE / GG) | Front · Ø262 mm × 21 mm |
| 2014-2020 Honda Fit / Jazz (GK / GH / GP) | Front · Ø262 mm × 21 mm |
| 2020-2026 Honda Fit / Jazz (GR / GS) | Front · Ø262 mm × 21 mm |
| Fitment & Installation | |
| Primary Vehicle Application | Honda Fit / Jazz |
| Model Years & Chassis Codes | 2009-2014 GE / GG · 2014-2020 GK / GH / GP · 2020-2026 GR / GS |
| Axle | Front |
| Caliper Mounting Type | Direct mount |
| Minimum Wheel Size | 15 in or larger |
| Minimum Spoke Clearance | 42 mm |
| Brake Line Fitting Type | Vehicle-specific fittings; caliper-side and chassis-side fittings vary by application |
| Bedding-In Procedure | Required |
Confirm your Honda Fit / Jazz chassis code, front wheel diameter, and at least 42 mm of spoke-to-caliper clearance before ordering. Wheel offset and spoke shape change real clearance.
What’s Included in the WD4 Direct-Mount Kit
Calipers ×2
Two WD4 forged 4-piston front calipers.
Brake Pads
Brake pads for both front calipers, rated 0–600 °C and intended for iron / steel rotors.
Brake Rotors ×2
Two Ø262 mm × 21 mm one-piece vented directional rotors, left/right specific.
Brake Hoses ×2
Stainless-steel braided brake lines with vehicle-specific fittings for Fit / Jazz.
Will It Fit Your Honda Fit / Jazz?
Before ordering, confirm your chassis code, front wheel diameter, and at least 42 mm of spoke-to-caliper clearance. Wheel offset and spoke shape change real clearance.
1. Wheel Diameter
15 in or larger wheels are required.
2. Spoke Clearance
Minimum spoke clearance: 42 mm to the caliper face.
3. Vehicle Model
Confirm Honda Fit / Jazz chassis code: GE / GG, GK / GH / GP, or GR / GS.
Wheel offset, spoke shape, and barrel design all affect real-world clearance. We recommend checking with a caliper template if you run aggressive wheels.
Installation & Bedding for Honda Fit / Jazz
- Direct mount to the factory Honda Fit / Jazz front knuckle.
- No caliper brackets, rotor hats, or universal adapters are used on this Direct-Mount configuration.
- Brake line fittings are vehicle-specific on both caliper and chassis sides.
- Bleed the system fully and inspect line routing at full lock and full droop.
- WD4 uses aluminum-alloy pistons without dust boots. Inspect and clean the piston area during regular service.
- Bedding-in procedure is required before hard use to seat the pads and transfer an even friction layer.
- Installation should be performed by a qualified technician. Do not drive aggressively until the bedding-in procedure is complete.
Honda Fit / Jazz WD4 Front Big Brake Kit FAQ
Will this kit fit my Honda Fit or Jazz?
This WD4 Direct-Mount front big brake kit is engineered for Honda Fit / Jazz chassis codes GE, GG, GK, GH, GP, GR, and GS. Confirm your chassis code, front wheel diameter, and minimum spoke clearance of 42 mm before ordering.
What wheel size do I need?
15 in or larger wheels are required, with at least 42 mm of spoke clearance to the caliper face. Wheel offset, spoke shape, and barrel design all affect real-world clearance, so a caliper template check is recommended for aggressive wheels.
What's included in the kit?
The kit includes two WD4 forged 4-piston front calipers, brake pads for both front calipers, two Ø262 mm × 21 mm one-piece vented directional rotors, and stainless-steel braided brake lines with vehicle-specific fittings for Fit / Jazz.
Is this a true bolt-on installation?
Yes. The calipers are direct-mount to the factory Honda Fit / Jazz front knuckle. Brake line fittings are vehicle-specific on both the caliper and chassis side, and a proper bedding-in procedure is required after installation.
Do the WD4 calipers use dust boots?
No. The WD4 front calipers use aluminum-alloy pistons without dust boots. Inspect and clean the piston area during regular service, especially after rain, track use, dust, or salted-road driving.
How much braking improvement should I expect?
Compared with the factory front brakes, the WD4 setup adds a Ø262 mm × 21 mm rotor, 45.4 cm² of total piston area per caliper across four 38 mm pistons, and a stiffer two-piece forged aluminum caliper body for firmer pedal feel and improved fade resistance under repeated hard stops.
Can I order a custom finish?
Yes. Custom caliper colors and finish options are available for this kit. Contact TTSPORT before ordering to confirm lead time and pricing.
Ready to spec your WD4 Honda Fit / Jazz front brake build?
Need help confirming chassis code or wheel clearance for your Fit / Jazz? Our team will check your build before you order.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 1113 reviews
Sort
Product Reviews
★★★★★ 5
Well made , gym quality
Style: 10 Pound, Pair
Color is nice and bright . The weights grips are good they do not slip . Prices reflect quality
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 5
Good purchase
Style: 3 Pound, Pair
These are just the right weight for me to start gaining muscle back in my arms, after a large weight loss. They are of good quality, they are covered in a nice rubber like coating that is soft to the touch. They are small enough that i can take them with me when I travel. My dog has got hold of them a couple times and played with them, and they held up just fine without any damage.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
★★★★★ 5
Solid, grippy, and they don’t roll away!
Style: 10 Pound, Pair
I bought these because I’m finally trying to build a consistent home workout routine and didn't want to drop a fortune on name-brand weights. I’ve been using this 10lb pair for about a month now for everything from overhead presses to lunges, and honestly, they’re exactly what I was looking for.
The Pros:
• That Neoprene Grip: The coating is fantastic. Even when my hands get pretty sweaty halfway through a workout, I don’t feel like I’m going to drop them. It’s a much "softer" feel than cold metal or hard plastic.
• The Hex Shape: This is a small detail that makes a huge difference. Since the ends are hexagonal, they don't roll across the floor when I set them down between sets. They also stay put if I’m using them for "renegade rows" or floor work.
• Compact Size: They aren’t bulky. I can easily shove them under my bed or in the corner of the closet when I’m done.
• No Weird Odor: I was worried they might smell like a tire factory (which happens with some rubber-coated weights), but these had almost no scent right out of the box.
The Cons:
• Handle Diameter: The handles are a little on the thicker side. I have medium-sized hands and it’s fine, but if you have very small hands, they might feel a bit chunky to wrap your fingers all the way around.
• Color Scuffs: The navy blue looks great, but if you clank them together or drop them on concrete, the coating can scuff or show dust pretty easily.
The Verdict:
If you just need a reliable set of weights for HIIT, Pilates, or general strength training, these are a no-brainer. You're basically getting gym-quality equipment for a fraction of the price. I’ll probably be back for the 15lb set in a few months!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 27, 2026
★★★★★ 5
Simple, Comfortable, and Exactly What You Expect
Style: Rack with 3 Pairs (5, 10, and 15 Pound)
These are pretty much exactly what you want from a set of dumbbells — simple, functional, and no nonsense. The neoprene coating gives them a comfortable grip and keeps them from feeling slick in your hands, especially during longer workouts or if your hands get sweaty.
The coating also helps keep them from banging up floors or making as much noise compared to bare metal weights, which is nice if you’re working out at home.
Weight accuracy seems fine for general fitness use, and they’ve worked great for things like accessory movements, shoulder work, lighter presses, rehab-style exercises, and general muscle toning. The shape also helps keep them from rolling around everywhere when set down.
They’re not fancy, and they’re not trying to be — they’re just dependable dumbbells that do what they’re supposed to do at a fair price.
If you want straightforward hand weights for home workouts without overthinking it, these are a solid buy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 5
Reliable, Comfortable Dumbbells I Actually Use Every Day
Style: 12 Pound, Pair, Style: 12 Pound, Pair
I’ve been using the Amazon Basics Neoprene Dumbbell Hand Weights daily, and they’ve honestly been perfect for my routine. Whether I’m doing a quick morning workout or adding resistance to a longer session, these have held up really well.
The neoprene coating makes a big difference—it provides a comfortable, non-slip grip, even during longer workouts or when my hands get a little sweaty. They’re also easy to clean and don’t have that strong rubber smell some weights can have.
I really appreciate the hex shape too. They stay put when I set them down (no rolling across the floor), which makes switching between exercises quick and frustration-free. The weight feels evenly distributed and well-balanced, so movements feel controlled and smooth.
Overall, these are simple, no-frills dumbbells that just work. If you’re looking for reliable hand weights for everyday use—whether you’re a beginner or just need something dependable for home workouts—these are a great choice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 14, 2026