Loaded-Vehicle Control
Forged 6-piston front calipers with 79 cm² total piston area per caliper for managing added curb weight.
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 5 - Jul 10
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
2021-2026 Ford Bronco & 2022-2026 Bronco Raptor OR6 Direct-Mount Front Big Brake KitDirect Mount Series Front Axle Off Road 6 Piston 2021 2026 Ford Bronco (U725) & 2022 2026 Ford Bronco Raptor (U725) OR6 Direct Mount Front Big Brake Kit The TTSPORT OR6 front big brake kit is built for loaded Ford Bronco and Bronco Raptor (U725) builds running larger tires, armor, winch, roof tent, and recovery gear. It targets predictable pedal control on long descents, washboard roads, and slow technical sections not headline bite numbers. Why Ford
Direct-Mount Series · Front Axle · Off-Road 6-Piston
2021-2026 Ford Bronco (U725) & 2022-2026 Ford Bronco Raptor (U725) OR6 Direct-Mount Front Big Brake Kit
The TTSPORT OR6 front big brake kit is built for loaded Ford Bronco and Bronco Raptor (U725) builds running larger tires, armor, winch, roof tent, and recovery gear. It targets predictable pedal control on long descents, washboard roads, and slow technical sections — not headline bite numbers.
Why Ford Bronco & Bronco Raptor Builders Choose the OR6
Stock front brakes were sized for stock weight and stock tire diameter. Add 35s, a steel front bumper, a winch, sliders, and a rooftop tent, and the front axle is doing more work every time you slow down. Heat builds faster, pad bite changes through a descent, and the pedal starts to feel different from corner one to corner ten.
OR6 increases front clamping capacity and thermal headroom so the pedal stays consistent when the truck is loaded and the grade is long.
Application-Correct Rotor Size
2021-2026 Ford Bronco and 2022-2026 Ford Bronco Raptor (U725) use the OR6 Ø340 mm × 32 mm front rotor specification.
Descent Confidence
Heat-treated high-carbon iron rotors, internally vented, sized for sustained heat on long downhills.
Off-Road Durability
One-piece heat-insulated pistons with dust boots and PTFE / SUS304 stainless braided lines for trail dust, vibration, and heat cycling.
Direct-Mount Fit
Direct-Mount Series caliper configured for the Ford Bronco and Bronco Raptor (U725) front axle — not a universal bracket workaround.
Predictable Modulation
The included pads run a 0–600 °C operating range with an average μ of 0.38, tuned for loaded trail and overland use rather than peak track bite.
OR6 Direct-Mount Technical Specifications & Kit Options
| Brake Caliper | |
|---|---|
| Series | Direct-Mount Series |
| Model / Application | OR6 |
| Axle Position | Front |
| Piston Count | 6-piston |
| Piston Type | One-piece heat-insulated pistons with dust boots |
| Piston Diameter | 40 mm × 4 / 43 mm × 2 |
| Caliper Dimensions | L 301 mm × W 149 mm × H 130 mm |
| Total Piston Area | 79 cm² per caliper, all pistons combined |
| Manufacturing Process | Two-piece forged aluminum body |
| Net Weight | 4 kg per caliper, without pads |
| Surface Finish | High-temperature gloss coating |
| Recommended Wheel Size | 17 in or larger |
| Recommended Rotor Size | Ø340–355 mm × 32/34 mm |
| Brake Rotor | |
| Rotor Material | Heat-treated high-carbon cast iron |
| Axle Position | Front |
| Rotor Dimensions for This Application | Ø340 mm × 32 mm |
| Construction | One-piece rotor |
| Ventilation | Internally vented |
| Rotor Mounting | Fixed |
| Directional Design | Yes — left/right specific |
| Rotor Face Pattern | Wave Slot |
| Brake Pads | |
| Compatible Rotor Material | Iron / steel rotors only |
| Operating Temperature Range | 0–600 °C |
| Average Friction Coefficient | Average μ: 0.38; variation depends on temperature, line pressure, and rotor condition |
| Lines | |
| Brake Line Construction | Three-layer reinforced construction |
| Brake Line Material | PTFE inner liner / SUS304 stainless-steel braid / PVC protective outer sheath |
| Brake Line Fittings | Vehicle-specific fittings; caliper-side and chassis-side fittings vary by application |
| Vehicle Application & Rotor Mapping | |
| 2021-2026 Ford Bronco (U725) | 340 mm × 32 mm |
| 2022-2026 Ford Bronco Raptor (U725) | 340 mm × 32 mm |
| Fitment & Installation | |
| Primary Vehicle Application | 2021-2026 Ford Bronco (U725) · 2022-2026 Ford Bronco Raptor (U725) |
| Model Years | Ford Bronco U725: 2021-2026 · Ford Bronco Raptor U725: 2022-2026 |
| Axle | Front |
| Caliper Mounting Type | Direct mount |
| Minimum Wheel Size | 17 in or larger |
| Minimum Spoke Clearance | 91 mm |
| Brake Line Fitting Type | Vehicle-specific fittings; caliper-side and chassis-side fittings vary by application |
| Bedding-In Procedure | Required |
For 2021-2026 Ford Bronco (U725) and 2022-2026 Ford Bronco Raptor (U725), the correct OR6 rotor specification is Ø340 mm × 32 mm. Do not use the older 335 / 345 / 355 mm × 34 mm option layout for this application.
What’s Included in the OR6 Direct-Mount Kit
Calipers ×2
2 × OR6 forged 6-piston front calipers, left/right specific.
Brake Pads
Brake pads for both front calipers, rated 0–600 °C and intended for iron / steel rotors.
Brake Rotors ×2
2 × one-piece front rotors, Ø340 mm × 32 mm, heat-treated high-carbon cast iron, internally vented and left/right specific.
Brake Hoses ×2
2 × vehicle-specific stainless braided brake lines with PTFE inner liner, SUS304 braid, and PVC protective outer sheath.
Mounting Hardware
Vehicle-specific direct-mount hardware for Ford Bronco / Bronco Raptor (U725) front-axle installation.
Direct-Mount Series uses one-piece rotors and direct-mount calipers. Rotor Hats and Caliper Brackets are not included because they are not used on this OR6 application.
Will It Fit Your Ford Bronco or Bronco Raptor?
OR6 calipers require 17 in or larger wheels with a minimum 91 mm spoke clearance. Most 17 in off-road wheels with open spoke designs clear, but wheel diameter alone is not enough — confirm your specific spoke shape, offset, and inner barrel profile before ordering.
1. Wheel Diameter
17 in or larger wheels are required.
2. Spoke Clearance
Minimum spoke clearance: 91 mm. Confirm the wheel's inner spoke geometry against the caliper outline before installation.
3. Vehicle Model
Application: 2021-2026 Ford Bronco (U725) and 2022-2026 Ford Bronco Raptor (U725), front axle, with Ø340 mm × 32 mm rotor specification.
Need help confirming wheel clearance or OR6 compatibility for your Bronco build? Send your model year, trim, wheel specs, tire size, vehicle weight, and use case before ordering.
Installation & Bedding for Ford Bronco & Bronco Raptor
- This is the OR6 front axle big brake kit for 2021-2026 Ford Bronco (U725) and 2022-2026 Ford Bronco Raptor (U725).
- The correct rotor specification for this application is Ø340 mm × 32 mm.
- Direct-Mount Series caliper configuration is not a universal bracket workaround.
- Brake-line fittings are vehicle-specific; caliper-side and chassis-side fittings vary by application.
- Confirm wheel diameter and the 91 mm minimum spoke clearance before ordering.
- A proper bedding-in procedure is required to transfer pad material to the rotor face and stabilize friction before heavy use or long descents.
- Installation by a qualified brake technician is required.
Ford Bronco & Bronco Raptor OR6 Big Brake Kit FAQ
Will OR6 fit 2021-2026 Ford Bronco and 2022-2026 Bronco Raptor?
Yes. This OR6 front kit is configured for 2021-2026 Ford Bronco (U725) and 2022-2026 Ford Bronco Raptor (U725). The correct rotor specification for both applications is Ø340 mm × 32 mm.
Will this OR6 kit fit my 17-inch wheels?
OR6 calipers require 17 in or larger wheels with a minimum 91 mm spoke clearance. Most 17 in off-road wheels with open spoke designs clear, but wheel diameter alone is not enough — confirm your specific spoke shape, offset, and inner barrel profile before ordering.
What rotor size does this application use?
2021-2026 Ford Bronco (U725) and 2022-2026 Ford Bronco Raptor (U725) use Ø340 mm × 32 mm one-piece front rotors in the OR6 Direct-Mount Series. Do not use the older 335 / 345 / 355 mm × 34 mm option layout for this application.
Does this kit include rotor hats or caliper brackets?
No. This is a Direct-Mount Series OR6 application with one-piece rotors and direct-mount calipers. Rotor Hats and Caliper Brackets are not used on this configuration.
Is this a front-only kit?
Yes. This listing is the OR6 front axle big brake kit for Ford Bronco and Bronco Raptor (U725). It does not include rear hardware.
Are the brake pads aggressive street pads or trail pads?
The included pads run a 0–600 °C operating range with an average μ of 0.38, tuned for predictable modulation on loaded trail and overland use rather than peak track bite.
Do I need to bed in the brakes?
Yes. A proper bedding-in procedure is required to transfer pad material to the rotor face and stabilize friction before heavy use or long descents.
Are the brake lines included?
Yes. The kit includes three-layer stainless-steel braided lines with PTFE inner liner, SUS304 stainless-steel braid, and PVC protective outer sheath. Caliper-side and chassis-side fittings are vehicle-specific.
Ready to spec your OR6 Bronco or Bronco Raptor build?
Build a brake package matched to your Bronco's weight, tires, and terrain.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 676 reviews
Sort
Product Reviews
★★★★★ 5
Good value. Comfortable. Washes & dries at home just fine.
Size: Queen Comforter, Color: Grey Comforter
Super comfy, soft beautiful fabric, very light but warm. Generous size. I washed it in my newer Samsung washer and it filled it 100% just by itself. It came out fine and the washer managed to spin out almost all the water. I dried it for a little over an hour on medium plus an additional hour on low-- lots of tennis balls and dryer sheets. The zillion wrinkles have almost disappeared. It looks great and is super-puffy-- I was concerned the filling would be lumpy but no problem. Good value. (PS- reasonably immune to cat destruction, so far-- They don't like to walk on it, they walk like they're walking in snow!)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 29, 2025
★★★★★ 5
Beautiful, Plush, Soft, Pure White and Great Price. High Quality!
Size: Queen Comforter, Color: White Comforter
Have nothing to say but good. Easy lightweight clean. Impressed by plushness of the entire Queen. Looks good and ready to dive into. Unbelievable low cost compared to box stores out there. Perfect for self and guests. 5 Star
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
★★★★★ 5
Craftsmanship. Very fluffy
Size: Queen Comforter, Color: Dusty Pink Comforter
Material is super comfy. It’s just right temperature wise . Not to hot or cool. Color is true!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026
★★★★★ 5
Good quality, worth buying
Size: Full Comforter, Color: White Comforter
Very comfortable, holds equal padding really well, has a good weight to it, and great sleep is to be expected. It fits as described and seen on the page. It doesn’t make you overly hot, but it also keeps you warm when it’s cold. Color stays white for a respectable timeline. Highly recommend
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 3, 2026
★★★★★ 4
The weight of comforter
Size: Queen Comforter, Color: Sage Green Comforter
Very happy with comforter. Color was exact. The weight was just right
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026