G4 LED Bulb 2W 30W Equivalent Daylight 6000K Dimmable - 10 Pack

G4 LED Bulb 2W 30W Equivalent Daylight 6000K Dimmable - 10 Pack2W G4 Bi Pin LED Bulb (30W Equivalent) 6000K Daylight Key Features Base Type: G4 Bi Pin Power Consumption: 2W Luminous Flux: 250 Lumens Incandescent Equivalent: 30W Voltage: AC DC 12V Color Temperature: 6000K (Daylight) Beam Angle: 360 degrees Dimmable: Yes (Requires compatible LED dimmer) Material: Clear silica gel encapsulation Average Lifespan: Up to 15,000 hours Replaces Cross Reference Part Numbers Direct replacement for 20W, 25W, and 30W G4

2W G4 Bi-Pin LED Bulb (30W Equivalent) - 6000K Daylight

Key Features

• Base Type: G4 Bi-Pin
• Power Consumption: 2W
• Luminous Flux: 250 Lumens
• Incandescent Equivalent: 30W
• Voltage: AC/DC 12V
• Color Temperature: 6000K (Daylight)
• Beam Angle: 360 degrees
• Dimmable: Yes (Requires compatible LED dimmer)
• Material: Clear silica gel encapsulation
• Average Lifespan: Up to 15,000 hours

Replaces / Cross-Reference Part Numbers

• Direct replacement for 20W, 25W, and 30W G4 halogen bulbs.
• Compatible with any fixture requiring a G4 bi-pin base bulb.

Compatibility & Fitment

• For use in low voltage 12V AC/DC systems.
• Ideal for RVs, marine boats, landscape lighting, under-cabinet puck lights, desk lamps, and accent fixtures.
• Physical dimensions fit standard G4 sockets.
• For optimal dimming performance, use with an LED-compatible dimmer switch. Use with older, non-compatible dimmers may result in flickering or poor performance.

When to Replace

• Existing bulb is burned out or fails to illuminate.
• Light output is flickering, inconsistent, or has significantly dimmed.
• Upgrading from halogen bulbs to reduce energy consumption and heat output.
• Standardizing lighting for consistent color and brightness across multiple fixtures.

Installation Tips

• Turn off all power to the light fixture before installation.
• Handle the bulb by its base to avoid transferring oils from your skin to the delicate components.
• Align the two pins with the socket holes and push straight in until the bulb is fully seated.
• Do not force the bulb into the socket; ensure correct alignment.
• For best results in multi-bulb fixtures, replace all bulbs at the same time.