Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Happymodel Crux3 2S Micro Toothpick DroneThe Crux3 is a great flying and affordable "toothpick" style quadcopter, maybe not strictly a toothpick but close enough. You also have the option to mount an insta360 go for some cool stabilised footage. Key Features 41gram 1 2s brushless Toothpick drone New AIO 4in1 CrazybeeX flight controller CADDX ANT 1200tvl Camera New 1202. 5 brushless motor XT30 connector Compatible with Insta360 Go Camera ( this camera is NOT Included, you can add it by
The Crux3 is a great flying and affordable "toothpick" style quadcopter, maybe not strictly a toothpick but close enough. You also have the option to mount an insta360 go for some cool stabilised footage.
Key Features
- 41gram 1-2s brushless Toothpick drone
- New AIO 4in1 CrazybeeX flight controller
- CADDX ANT 1200tvl Camera
- New 1202.5 brushless motor
- XT30 connector
- Compatible with Insta360 Go Camera ( this camera is NOT Included, you can add it by yourself.)
Specification
- Brand Name: Happymodel
- Model: Crux3
- Item Name: 115mm F4 OSD 1-2S 3 Inch Toothpick FPV Racing Drone
- Wheelbase: 115mm
- Size: 97x97x35mm (without propellers)
-
Optional Receiver Version:
- Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
- Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)
- Internal SPI DSM2/DSMX version(Compatible with Spektrum or Multiprotocol DSM2/X radio)
- External Frsky RXSR receiver version(ACCST D16 sbus output)
- External TBS Crossfire Nano receiver version
- Weight: 41g (without battery)
- Recommend Lipo Battery: 2s 350mah/400mah/450mah/520mah Battery ( NOT Included)
Detailed Component Specifications
| EX1202.5 6400KV Motor |
Configu-ration:9N12P
Stator Diamter:12mm Stator Length:2.5mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ14*14.5mm Weight: 4.4g No.of Cells(Lipo):1-2S |
| Gemfan 3018 2-Blade Propeller |
Center Thickness:5.5mm
Prop Diameter:76.5mm Center Hole diameter:1.5mm |
| CrazybeeX FR V2.2 F4 Flight Controller |
MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU6000 (SPI connection) Board Size: 28.5x28.5mm Power Supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver or no receiver Built-in 5V 1A BEC(Frsky SPI RX Version) CRAZYBEEX FR V2.2 FC Firmware target: CrazybeeF4FR(Flysky SPI RX Version) CRAZYBEEX FS V2.2 FC Firmware target: CrazybeeF4FS(DSM2/X SPI RX Version)CRAZYBEEX DXS V1.0 FC firmware target: CrazybeeF4DXS (External Frsky RXSR Version) CRAZYBEEX PNP V2.2 Firmware target: CrazybeeF4DX (External TBS CRSF NANO Version) CRAZYBEEX PNP V2.2 Firmware target: CrazybeeF4DX |
| Onboard 5A BL_S 4in1 ESC |
MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.HEX Default protocol: DSHOT600 |
| Onboard Frsky SPI D8 Receiver Version |
SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 modelChannels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m |
| Onboard Flysky SPI receiver Version |
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 200~300mFailsafe support |
| Onboard DSM2/X SPI receiver Version |
SPI BUS receiver DSM2/DSMX compatible
Channels: Max 12ch
RSSI enable (show on the goggles) |
| External Frsky R-XSR receiver version |
Weight: 1.5g
Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel) Operating Voltage Range: 3.5V~10V Operating Current:70mA@5V Firmware Upgradable Compatibility: FrSky X Series modules and radios in D16 mode Could support Frsky New ACCESS Protocol ( Upgrade firmware) |
| External TBS CRSF Nano receiver version | Original TBS CROSSFIRE Receiver ,CRSF Protocol , Official TBS transmitter compatible |
| Onboard 5.8G 40CH 25/200mW VTX |
Output power: 25mw~200mw switchable
Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race bandSmartaudio ready |
| Caddx ANT 1200TVL Camera |
Image Sensor: 1/3" CMOS Sensor
Horizontal Resolution: 1200 TVL TV System: NTSC or PAL Switchable IMAGE: 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: [email protected] Auto Gain Control: YES BLC: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Work Temperature: -20℃~+60℃ Weight: 2g (N.W.) |
Included
- 1x Crux3 Frame and Canopy
- 1x F4 Flight Controller AIO 5A ESC Board
- 1x 5.8G 25-200mW VTX ( built-in Flight controller)
- 4x Happymodel EX1202.5 6400 KV Motor
- 4x Gemfan 3018 Propeller CW
- 4x Gemfan 3018 Propeller CCW
- 1x Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera
- 1x Screw Driver
- 1x Propeller Disassemble Tool
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy