SKU: 79569585984

RF Design RFD 868ux-EU Long Range Telemetry Modem Bundle

Sale price$149.90 Regular price$166.56
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

RF Design RFD 868ux-EU Long Range Telemetry Modem BundleThis is the ideal solution for long range telemetry or communications. Two RFD868ux EU modems with antennas for all antenna ports. The kit consists of: 2 x RFD868ux EU Radio Modems 1 x Antenna, 900MHz Quarter wave monopole 2. 1dBi 1 x Antenna, 900MHz Right Angle Quarter wave monopole 2. 1dBi 4 x Antennas, 900MHz Half wave dipole 3dBi 1 x FTDI USB cable 4 x RFD900u antenna cable (RPSMA) 1 x 900ux to 8 way socket cable (900ux) also suitable for 868ux 1

This is the ideal solution for long range telemetry or communications.

Two RFD868ux-EU modems with antennas for all antenna ports.

The kit consists of:

  • 2 x RFD868ux-EU Radio Modems
  • 1 x Antenna, 900MHz Quarter wave monopole 2.1dBi
  • 1 x Antenna, 900MHz Right Angle Quarter wave monopole 2.1dBi
  • 4 x Antennas, 900MHz Half wave dipole 3dBi
  • 1 x FTDI USB cable
  • 4 x RFD900u antenna cable (RPSMA)
  • 1 x 900ux to 8 way socket cable (900ux) also suitable for 868ux
  • 1 x PIXH2 to RFD900ux Telemetry Cable 150 mm - also suitable for 868ux

RFD868ux EU:

This is the RFD868ux EU on a double sided mini carrier board. It comes with a mini JST connector and 2x u.Fl RF connectors and heat sink.

RFD868ux EU New Features:

  • Fully compatible with RFD868x modems.
  • Air data rate up to: 500kbit/s.
  • AES Hardware accelerated encryption.
  • RC PPM Passthrough with telemetry at the same time.
  • SiK point to point firmware.
  • Note: Currently due to the bandwidth limitations of the 868 modems Asynchronous Mesh and Multipoint Firmware are not officially supported for the 868X modems and correct operation of this code cannot be guaranteed

Features:

  • Long range >40km depending on antennas and GCS setup
  • 2 x u.FL RF connectors, diversity switched.
  • 1 Watt (+30dBm) transmit power.
  • Transmit low pass filter.
  • > 15dB Low noise amplifier, high IP3.
  • RX SAW filter.
  • All I/O ESD protected and filtered.
  • Re implemented SiK firmware, field upgradable, easy to configure.
  • Small, light weight.
  • License free use in Europe, India

Interfaces:

  • RF : 2x u.FL RF connectors
  • Serial: Logic level TTL (+3.3v)
  • Power: +5v, ~800mA max peak (at maximum transmit power)
  • GPIO: General purpose IO (Digital capable).

Specifications:

  • Frequency Range: 869-870 MHz
  • Output Power: 500mW (+27dBm), controllable in 1dB steps ( +/- 1dB @=20dBm typical )
  • Air Data transfer rates: 12, 56, 64, 100, 125, 200, 224, kbit/sec (User settable, 64kbit default)*
  • UART data transfer rates: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 1M baud (User settable, 57600 default)* as per 868x EU

*note these values are correct as of version 3.16 SiK firmware

  • Output Power: 500mW (+27dBm) max
  • Receive Sensitivity: >111 dBm at 12kbps, 105 at 64 kbps and 98 at 200 kbps
  • Size: 25 mm (wide) x 33 mm (long) x 10.4 mm (thick) - Including RF Shield, PCB and Heatsink.
  • Weight: 10g
  • Mounting: Stand alone cable connection
  • Power Supply: +5 V nominal, (+3.5 V min, +5.5 V max), ~800 mA peak at maximum power
  • Temp. Range: -40 to +85 deg C

Software / GCS Support:

The software solution is an open source development called "SiK". It has been re implemented to suit the new processor architecture available on the 32bit ARM processor core. A boot loader and interface is available for further development and field upgrade of the modem firmware via the serial port.

Most parameters are configurable via AT commands, Eg. baud rate (air/uart), frequency band, power levels.

Integrated support for configuring the RFD900 radios is supported by APM Planner.

The default settings are at 57600 baud, N, 8, 1, and 200k air data rate.

The RFD868ux EU manual is here: RFD900ux Manual

The RFD868ux EU SiK software manual is here : RFD900x Peer-to-peer Manual

Software features include:

  • Frequency hopping spread spectrum (FHSS)
  • Transparent serial link
  • Point to Point
  • Configuration by simple AT commands for local radio, RT commands for remote radio
  • User configurable serial data rates and air data rates
  • Error correction routines, Mavlink protocol framing (user selectable)
  • Mavlink radio status reporting (Local RSSI, Remote RSSI, Local Noise, Remote Noise)
  • Automatic antenna diversity switching on a packet basis in real time
  • Automatic duty cycle throttling based on radio temperature to avoid overheating

Compliance:

The RFD868ux-EU is compliant with the following standards:

  • EN 301 489-3 V2.1.1
  • EN 300 220-2 V3.1.1
  • EN 62311:2008

*Please note that some newer versions of the FTDI VCP driver namely version 2.12.36.1 have been reported as possibly incompatible with the FTDI cables we stock. If you are experiencing issues, we recommend reverting to version 2.12.28 or before.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 79569585984

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 1029 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
F
foundbyXtopher
Los Angeles, US
★★★★★ 4
Sturdy Folding Room Divider with Good Privacy Coverage and Modern Look
Color: Black, Size: 4 Panel-88''
I picked this room divider up to help separate space in a room without needing permanent walls, and overall it works very well for creating privacy while still looking clean and modern. The size is one of the biggest advantages. At 6 feet tall and roughly 88 inches wide, it creates a noticeable visual separation and works well for apartments, dorms, offices, studios, shared rooms, or content creation setups where you want to hide clutter or define different areas. The black fabric and frame design give it a simple modern appearance that blends easily into most spaces without looking overly decorative or outdated. It has a clean minimalist look that works especially well in offices, bedrooms, gaming rooms, or studio environments. Assembly was fairly straightforward overall. Once fully put together, the divider feels reasonably stable for normal indoor use. The folding panel design also makes it flexible enough to angle different ways depending on the room layout. The portability is another strong point. Since it folds down, it is much easier to move or reposition compared to permanent partitions or heavier wooden dividers. That makes it practical for temporary privacy setups or changing room layouts frequently. Privacy performance is solid visually. It blocks sightlines well enough for changing areas, workspaces, video backgrounds, or separating sections of a room. The fabric also softens the space slightly instead of feeling harsh or industrial. One thing worth noting is that while it provides visual privacy, it is not soundproof. It helps define space and reduce some openness, but conversations and noise will still pass through normally. The material quality feels decent for the price range. The frame is lightweight but functional, though I would still avoid rough handling or constant aggressive repositioning over time. Value for money is good considering the size, flexibility, and convenience. Similar room dividers can become expensive quickly, especially for taller multi-panel setups. Overall, this is best for anyone needing an affordable flexible way to create separation and privacy in shared or open spaces. It works especially well for apartments, dorms, offices, studios, remote work setups, or content creators wanting a cleaner background without permanent construction.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
R
RealDeal
Lowell, US
★★★★★ 5
Looks nice but it's not very stylish, works as intended, happy with purchase
Color: Black, Size: 4 Panel-88''
This 6 ft room divider is exactly what I needed and works great! It was very easy to set up and took only a few minutes to assemble. I was pleasantly surprised by how lightweight it is, and it folds up easily for storage when not in use. The fabric-style panels look nice and provide good privacy, and the included clips help keep everything neatly in place. It’s a simple but effective design that does what it’s supposed to do. Because it’s lightweight, it may need a bit of extra support depending on where you place it—I used small weights on the base, and that completely solved the stability issue. Overall, I’m very happy with this purchase. It’s practical, easy to use, and a great value for the price. I would definitely recommend it! Industrial
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
L
LSch01
Cuba, US
★★★★★ 3
Assembly is harder than it should be; you get what you paid for
Color: Black, Size: 4 Panel-88''
Review of SUNALLY Room Divider 6FT Folding Privacy Screens, 4 Panel Fabric Divider for Room Separation, 88" W Freestanding Portable Wall Dividers Screen for Home Dorm Studio Office, Black I hate when I have to leave products a not so good review... Assembly is harder than it should be, mainly because there shouldn't BE any assembly. I have ordered several room divider privacy screens over the last couple of years and not one of them needed any kind of assembly. With that aside, it STILL was a pain in the sphincter to assemble. One of the "legs" just sits on top of a foot plate - it's not screwed in to anything. It's kind of flimsy and the base plates don't have anything on them to not scuff up the floor. With all that said, though, it does stand up and will block out what I need to block out. At the less-than-$50 price-point, it's kind of what should be expected. If I had purchased this outright, I would have considered sending it back and getting a higher quality. But if you only have $50 to spare and don't mind assembling things, it could be good for you.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
O
Ocean
Phoenix, US
★★★★★ 5
Great buy
Color: Black, Size: 4 Panel-88''
This room divider is exactly what I needed. When you have 2 kids sharing a room and don’t want to spend a lot of money to divide their space this is what you can use. Believe it or not they are much happier now. This came in a small box which scared me but once I was able to get this up I was very pleased. It was easy to put together. The fabric is pretty good quality, it’s stable and stands up fine. Good value and worth it to have peace and quiet in the house.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
B
Verified Purchase
Beth Lukes
Waukegan, US
★★★★★ 1
Junk
Color: Black, Size: 4 Panel-88'', Color: Black, Size: 4 Panel-88''
Horrible. The parts are not right. It won’t fit together or disassemble and can’t return it like this. Parts won’t fit properly and missing holes for screws. Also, can’t get through to a person for any assistance. Picture shows the hole and then the lack of a hole where a screw belongs.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026

recommand products