SKU: 51782653857

Walksnail Avatar HD Mini 1s Lite Kit (VTX + Camera)

Sale price$68.83 Regular price$76.48
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Walksnail Avatar HD Mini 1s Lite Kit (VTX + Camera)WARNING Due to the missing heatsync on the Artosyn SOC, please ensure this unit has sufficient cooling airflow when on the bench, any damage to this unit due to overheating will also not be covered under warranty. This is a special release for those extreme whoop pilots who want to save the most possible weight on their drone. Please pay special attention to this. Introducing the Walksnail Avatar Lite HD FPV Kit the ultimate choice for lightweight and

WARNING

Due to the missing heatsync on the Artosyn SOC, please ensure this unit has sufficient cooling/airflow when on the bench, any damage to this unit due to overheating will also not be covered under warranty. This is a special release for those extreme whoop pilots who want to save the most possible weight on their drone. Please pay special attention to this.

Introducing the Walksnail Avatar Lite HD FPV Kit - the ultimate choice for lightweight and high-performance FPV flying. This kit features the new Avatar Lite camera, which boasts an image sensor of 1/2.7" and a resolution of 1080P/60fps, 720P/120fps, 720P/60fps. The lens is 2.1mm with a FOV of 170° and an aperture of F2.0. The camera's minimal plastic design and lack of a back plate make it lighter than ever at only 1.8g, while still maintaining its impressive capabilities.

The kit also includes the Avatar Mini 1S VTX, which has a slimmed down design and weighs in at only 8.5g, making it 3.1g lighter than the original 1S VTX. It uses a whip antenna instead of a circular polarised antenna, and has a communication frequency of 5.725-5.850GHz. The transmitter power is FCC:<25.5dBm, CE:<14dBm, SRRC:<20dBm, and MIC:<25dBm. The I/O interface is JST1.06(Power in)JST1.04(USB) and the dimensions are 30306.5mm.

The kit also includes an IPEX 1S Lite Antenna with linear polarization, a frequency range of 5600-5900MHz, and a gain of 1.6 dBi. The package includes an Avatar Mini 1S Lite Kit, 4 Pin USB Cable, 4 Pin Power Cable, 1.4×8mm Screws, 1.4×10mm Screws, and M2 Anti-vibration Rubber Dampers *6mm. With a weight of only 8.5g and support for Betaflight, this kit is perfect for those who want to take their FPV flying to the next level.

The Walksnail Avatar Lite HD FPV Kit is packed with features that set it apart from the competition. With a resolution of 1080P/60fps, the camera provides crystal clear images even in fast-moving scenarios. The low latency of 22ms ensures that there is minimal delay between the camera and the transmission, providing a seamless FPV experience. The kit is also incredibly lightweight, weighing in at only 7.8g, making it perfect for those who prioritize portability. The Canvas mode allows for easy customization of the on-screen display, and the built-in 8g storage means you'll never have to worry about running out of space to record your flights. The HDMI out feature allows for easy sharing and viewing of your footage, and the wide power input of 3.1-13V and maximum output power of 350mw ensure that the kit can be used with a variety of power sources. The small antenna is a nice touch, as it makes the kit even more portable and easy to transport.

New version of VTX
Avatar HD mini 1S lite kit comes with the smaller, lighter and stronger new version VTX board, 30*30mm size, 5.1g, which can be installed in smaller drones.

Avatar HD lite camera weighs only 1.8g, but with 2.1mm lens and 170°FOV, which can bring you a clearer, more realistic image quality.

High quality, low latency
Weighing only 7.8g, but avatar mini 1s lite kit supports 1080P/60fps, 720P/100fps high definition FPV image quality with a average 22ms ultral-low latency, bring you a beautiful clear 1080P digital FPV video and an unforgettable flying experience.
8G Built-in Storage
The Avatar vtx comes with 8g built-in storage, it can record 1080p or 720p HD and interference-free flight footages without adding an extra SD card and an action camera, reducing the overall weight of the drones and extending the flight time, allowing you to experience a more comfortable flight while recording 1080 HD videos.
Canvas Mode
Supporting Betaflight, kiss, Inav, Ardu full OSD display and customization, you'll be able to customize various OSD fonts, colors and patterns you like and easily adjust the parameters you want via remote control.
3.1-13V input, max 350ms output
The avatar mini 1S lite kit is special designed for 65mm/75mm tiny drones, with 3.1-13V voltage input and 350mw power output, you'll be able to fly all kinds of tinywhoops in a amazing video quality and range.

Specifications

Camera

  • Model: Avatar Lite camera
  • Image Sensor: 1/2.7"
  • Resolution: 1080P/60fps,720P/120fps,720P/60fps
  • Ratio: 16/9; 4/3
  • Lens: 2.1mm
  • FOV: 170°
  • Aperture: F2.0
  • Shutter Rolling: Rolling Shutter
  • Min. Illumination: 0.001Lux
  • Weight: 1.8g
  • Dimensions: 14*14*16mm

VTX

  • Model: Avatar Mini 1S Module
  • Communication Frequency: 5.725-5.850GHz
  • Transmitter Power (EIRP): FCC:<25.5dBm; CE:<14dBm; SRRC:<20dBm; MIC:<25dBm
  • I/O Interface: JST1.0*6(Power in)JST1.0*4(USB)
  • Mounting Holes: 25.5*25.5mm
  • Dimensions: 30*30*6.5mm
  • Storage: 8G
  • Recording: 1080p/720p
  • Weight: 5.1g
  • Operating Temperature: -20-40℃
  • Channels: 8
  • Wide Power Input: 3.1V-13V
  • Maximum Output Power: 350mW
  • Supported FC System: Betaflight
  • OSD: Canvas Mode
  • Bitrate: 25mbps; 50mbps
  • Latency: Average Delay 22ms
  • Antenna: IPEX

1S Lite Antenna

  • Polarization: Linear
  • Frequency Range: 5600-5900MHz
  • GainL 1.6 dBi
  • VSWR: ≤1.5
  • Input Impedance: 50Ω
  • Interface: IPEX-1
  • Size: R 5mm, L 70mm
  • Weight: 0.5g

Included

  • Avatar Mini 1S Lite Kit x1
  • 4 Pin USB Cable x1
  • 4 Pin Power Cable x1
  • 1.4×8mm Screws x4
  • 1.4×10mm Screws x2
  • M2 Anti-vibration Rubber Dampers *6mm x4
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 51782653857

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 418 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
N
Verified Purchase
Nick Frazier
Battle Creek, US
★★★★★ 4
Good stuff at a good price
Model: NewSLS50_52
Works well and sticks well. I used a roller and it has been over a year and everything still sticking as good as day i put it everywhere. I didnt use any adhesive but I did wipe everything down with acetone before I applied. Good stuff at a good price
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
D
Verified Purchase
Darren Gray
Pawtucket, US
★★★★★ 5
Good value
Model: NewSLS50_52, Model: NewSLS50_52
Working perfectly. Install of stereo equipment and carpet left me wanting some heat and sound resistant materials.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 23, 2026
T
Verified Purchase
Tharin
Birmingham, US
★★★★★ 5
BUY THIS ONE!
Model: NewSLS50_52
This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ. Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that. Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2025
H
Verified Purchase
Harvey
Dallas, US
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
L
Verified Purchase
Lyrah
Whiting, US
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025

recommand products