
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 8 - Jul 13
For Your Every Summer RSVP, with Code: SUMMER15
Description
Happymodel Crux3 ELRS 1S Micro Toothpick QuadcopterKey Features 40gram 1s brushless Toothpick drone AIO Flight controller with ELRS Receiver and 5. 8G VTX CADDX ANT 1200TVL Camera New 1202. 5 KV11500 brushless motor Compatible with CaddxFPV Peanut and Insta360 GO2 ( NOT Included) Carrying Caddxfpv peanut Got 4. 5 minutes flying time with 1s 650mah battery Suggested Battery 1S 450mah 650mah 660mah 720mah battery PH2. 0 Plug Specification Brand Name: Happymodel Model: Crux3 1S ELRS Item Name: 115mm F4
Key Features
- 40gram 1s brushless Toothpick drone
- AIO Flight controller with ELRS Receiver and 5.8G VTX
- CADDX ANT 1200TVL Camera
- New 1202.5 KV11500 brushless motor
- Compatible with CaddxFPV Peanut and Insta360 GO2 ( NOT Included)
- Carrying Caddxfpv peanut Got 4.5 minutes flying time with 1s 650mah battery
Suggested Battery
- 1S 450mah / 650mah / 660mah / 720mah battery PH2.0 Plug
Specification
- Brand Name: Happymodel
- Model: Crux3 1S ELRS
- Item Name: 115mm F4 1S Toothpick FPV Racing Drone BNF
- Wheelbase: 115mm
- Size: 97mmx97mmx35mm (without propellers)
- Weight: 40g(without battery)
Detailed Component Specifications
| Motor |
Mode: EX1202.5 KV11500
Configu-ration:9N12P Stator Diamter:12mm Stator Length:2.5mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ14mm*14.5mm Weight(g):4.4g No.of Cells(Lipo):1S |
| Propellers |
Gemfan 75mm
Center Thickness:5mm Prop Diameter:75mm Center Hole diameter:1.5mm Pitch:0.9in |
| Flight controller |
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection) Original whoop size compatible Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI ExpressLRS 2.4GHz receiverBuilt-in 5V 1A BECFlight controllerfirmware target: CRAZYBEEF4SX1280 |
| Onboard 4in1 ESC |
MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT300 |
| Onboard SPI ExpressLRS 2.4GHz Receiver |
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHzAntenna : SMD antenna Telemetry output Power: <12dBmReceiver protocol to flight controller: CRSF Could bind with All ExpressLRS 2.4GHz TX module , ExpressLRS firmware need 1.0.0 or latest |
| Onboard 5.8g VTX |
Output power: 25mw~200mw switchable
Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race bandSmartaudio ready |
| Caddx ANT 1200tvl camera |
Image Sensor: 1/3" CMOS Sensor
Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: [email protected] Auto Gain Control: YES BLC: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Work Temperature: -20℃~+60℃ Weight: 2g (N.W.) |
Included
- 1x Crux3 Frame and canopy
- 1x ELRS F4 2G4 flight controller built-in SPI ExpressLRS 2.4G receiver
- 4x Happymodel EX1202.5 KV11500 brushless motor
- 1x Gemfan 75mm bi-blade Propellers(4cw+4ccw)
- 1x Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera
- 1x 5.8G 25mw~200mw 40ch vtx (Flight controller built-in)
- 1x Screw Driver
- 1x Propeller disassemble tool
- 3D Printed canopy for Insta360 GO2 and CaddxFPV Peanut
- 1x Happymodel Handbag
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy