SKU: 43743275647

LDO LCP300-24D5 300W 24V and 5V Compact Power Supply (PSU)

Name: LDO LCP300-24D5 300W 24V and 5V Compact Power Supply (PSU)
Brand: alleghenybetterhealth.org
SKU: 43743275647
Price: 68.99 USD
Availability: InStock
Rating: 4.2808 (1325 reviews)

$62.09 $68.99

Save 10%

No.2 Bestseller on alleghenybetterhealth.org >

Shipping Estimate
USA

USA

CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Description

LDO LCP300-24D5 300W 24V and 5V Compact Power Supply (PSU)The LCP300 24D5 is a compact, fully enclosed 300W dual output power supply for 3D printing applications. Featuring power factory correction and Gallium Nitride technology, the LCP300 24D5 provides 24V and 5V outputs with an efficiency of over 90%. Features Dual output: 24VDC (x3) and 5VDC (x1) Highly compact (1209535mm) and fully enclosed GaN technology with PFC and efficiency of up to 91% Overload, overvoltage, and temperature protection Wide AC

The LCP300-24D5 is a compact, fully enclosed 300W dual-output power supply for 3D printing applications. Featuring power factory correction and Gallium Nitride technology, the LCP300-24D5 provides 24V and 5V outputs with an efficiency of over 90%.

Features

Dual output: 24VDC (x3) and 5VDC (x1)
Highly compact (120×95×35mm) and fully enclosed
GaN technology with PFC and efficiency of up to 91%
Overload, overvoltage, and temperature protection
Wide AC input: 100-240VAC
Dual AC input terminals, supporting AC series connection

Model Breakdown

Electrical Specifications

Model	LCP300-24D5
Output	Output Voltage	5V	24V
	Max Current	5A	11.45A
	Max Power	25W	275W
	Ripple & Noise (Max)²	150mVp-p	360mVp-p
	Line Regulation	±1%	±1%
	Load Regulation	±5%	±2%
	Start-up / Rise Time³	3000ms/115VAC，≤100ms/220VAC
	Hold-up Time⁴	≥8.3ms at full load
Input	Voltage Range	100 - 240VAC
	Frequency Range	50-60Hz
	Efficiency	≥91%
	AC Current	3.5A/115VAC 2A/230VAC
	Inrush Current	≤50A/220VAC cold start
	Leakage Current	≤0.75mA, 240VAC/50Hz
	L/N Terminal Current⁵	12A Max
Protection Features	Overload Protection	≥110% of rated output power
		5.2-6A (5V), 13-17A (24V), output voltage shuts off; recovers automatically after fault removal
	Overvoltage Protection	≥135% of rated output voltage
		Output voltage shuts off; recovers automatically after fault removal
	Temperature Protection	When enclosure surface temperature exceeds 110°C
		Output voltage stops until temperature drops below 80°C
Environmental Conditions	Operating Temperature	-20~40℃
	Operating Humidity	10~90%
	Storage Temperature & Humidity	-30~85℃/ 5~90%
	Vibration	10-500Hz, 2G, 10 minutes/cycle, 60 minutes in each X, Y, and Z direction
Safety & Compliance	Safety Standards
	High Voltage Resistance	2.5KVAC
	Insulation Resistance	≥100MΩ
	EMC Immunity	Compliant with EN/IEC: EN55032
	Harmonic Standards	Compliant with IEC61000-3-2
Others	Dimensions	120.0mm (L) * 95.0 mm (W) * 35.0 mm (H)
	Packaging	132x105x39mm
	MTBF	50000h (25℃)
Notes	Unless otherwise specified, all specifications are measured under 230VAC input, rated load, and 25°C ambient temperature. Ripple and noise measurement: Measured at the end of the output cable, with a 0.1μF ceramic capacitor and a 47μF electrolytic capacitor. Start-up time: The time from when power is applied to the input until the output voltage rises to 90% of its rated value. Rise time: The time required for the power supply to reach its rated output value from a no-power state. Hold-up time: The duration from when the AC input is cut off to when the output drops below 5% of the standard value. L/N terminal current: Refers to AC voltage interface, where a single input is used to distribute one output. The maximum current the AC voltage interface can withstand is 12A.