Eaton Tripp Lite Series SFP28 Transceiver - 25GBase-SR, LC Duplex MMF, 25 Gbps, 850 nm, 100 m (328 ft.)

The Eaton Tripp Lite Series SFP28 Transceiver is a compact, hot-pluggable module engineered to unlock the full potential of modern data-center networks. Designed for 25 Gbps connectivity over multimode fiber, this SFP28 transceiver delivers reliable, low-latency performance for servers, switches, and other networking gear. With an 850 nm wavelength and LC duplex MMF compatibility, it provides a scalable uplink option that fits seamlessly into existing infrastructure while enabling higher throughputs for virtualization, cloud services, and demanding applications. Built to withstand real-world data-center conditions, this transceiver blends robust construction with easy installation, making it a trusted choice for upgrading network backbone connections.

• High-performance 25GBase-SR SFP28 transceiver capable of delivering full 25 Gbps data rates over multimode fiber, ideal for upgrading rack-level and data-center uplinks without replacing entire switch architectures.
• 850 nm VCSEL technology paired with multimode fiber support enables reliable short-reach connections up to 100 meters (328 feet), making it a perfect match for intra-rack and closet deployments where high-speed links are required.
• LC duplex optical connector and compact SFP28 form factor provide plug-and-play compatibility with a wide range of switches, servers, and routers that support SFP28 modules, facilitating quick installations and minimal downtime.
• Rugged zinc housing delivers physical protection and EMI shielding, helping maintain signal integrity in dense cabling environments commonly found in data centers and enterprise networks.
• Designed for reliability and ease of use, the transceiver supports common enterprise features such as hot-swapping and, in many environments, digital diagnostics monitoring (DDM/DOM) for proactive fault detection and health monitoring, backed by robust vendor support and compatibility with major vendors’ platforms.

Technical Details of Eaton Tripp Lite Series SFP28 Transceiver

• Product Type: SFP28 Transceiver
• Standard: 25GBASE-SR
• Data Rate: 25 Gbps
• Fiber Type: Multimode Fiber (MMF)
• Wavelength: 850 nm
• Distance: Up to 100 meters (328 feet)
• Connector: LC Duplex
• Operating Temperature: 0 to 70°C (commercial range)
• Connector Type: LC Duplex
• Form Factor: SFP28, hot-pluggable
• Diagnostics: Digital Diagnostics Monitoring (DDM/DOM) capable (where supported by device)
• Compatibility: Works with SFP28 ports on compatible switches, routers, and servers
• Compliance: RoHS compliant
• Manufacturer: Tripp Lite (a brand within the Eaton portfolio)

how to install Eaton Tripp Lite Series SFP28 Transceiver

Installing the Eaton Tripp Lite Series SFP28 Transceiver is a straightforward process designed for minimal downtime. Follow these steps to ensure proper seating, reliable operation, and optimal performance:

• Check compatibility: Confirm that your network device (switch, router, or server) has an available SFP28 slot and supports 25GBASE-SR transceivers. Review the device’s compatibility matrix or vendor documentation to ensure this module is supported and enabled on the port.
• Power considerations: In most modern devices, SFP28 modules are hot-pluggable. If your hardware supports hot-swapping, you can insert the transceiver with the system powered on. If you prefer, power down the device before installation to eliminate any risk of electrical surges or misalignment.
• Prepare the fiber: Use clean, properly terminated multimode fiber (preferably OM3/OM4) with LC duplex connectors. Inspect and clean both fiber ends with an appropriate cleaning tool to remove dust, oils, and debris that could impair signal integrity. Ensure the fiber length is appropriate for your 100-meter link budget.
• Install the transceiver: Hold the SFP28 module by its edges and align it with the SFP28 port so the connector is oriented correctly. Gently insert the module into the port until the latch secures with a click. Do not force the module; if it does not seat smoothly, remove it and reinsert with care.
• Connect the fiber: Attach the LC duplex fiber cable to the transceiver’s LC duplex connector, ensuring a snug fit without stressing the cable. Route the fiber to your network device, maintaining proper bend radius and avoiding sharp twists that could degrade signal quality.
• Verify link and configuration: Power on the device (or confirm it is powered). Check the port status indicators on both the transceiver and the host device. If the link does not come up automatically, you may need to configure the port speed to 25G on the switch or server or perform a brief reboot to allow the device to recognize the module.
• Test performance: Run basic throughput and latency tests to verify that the link operates at the expected 25 Gbps rate and that error rates remain within acceptable levels. If issues arise, re-check fiber cleanliness, connector seating, and compatibility settings.

Frequently asked questions

• What is a 25GBase-SR SFP28 transceiver?

  The 25GBase-SR transceiver is a hot-pluggable optical module designed to transmit data at 25 Gbps over multimode fiber, using a short-wavelength (850 nm) VCSEL. It is commonly used to upgrade uplink connections between servers, switches, and storage devices within data centers and enterprise networks.

• What type of fiber does it use?

  It uses multimode fiber (MMF) with LC duplex connectors. This makes it suitable for intra-data-center links and short-reach connections, typically with OM3/OM4 fiber that supports the 850 nm operating wavelength.

• What distance can I achieve with this transceiver?

  The transceiver supports up to 100 meters (328 feet) on standard multimode fiber, enabling efficient uplinks within racks, cages, or data-center floors where short-reach connectivity is required.

• Is this module hot-pluggable?

  Yes. SFP28 modules are designed for hot-swapping in compatible devices, which means you can insert or remove the transceiver without powering down the entire system in supported environments. Always follow your equipment vendor’s guidelines when performing hot-swaps.

• Will it work with any brand of switch or server?

  Most SFP28 25GBase-SR transceivers are designed to be interoperable with devices that support the SFP28 standard. However, compatibility can vary by vendor and firmware version. Check the device’s compatibility documentation or contact the vendor if you’re unsure about cross-vendor support.

• Do I need special software or drivers?

  In most cases, no special drivers are required. The transceiver operates as a standard 25G uplink module and is recognized by the host device through its factory firmware. If you experience issues, confirm that port configurations are set to 25 Gbps and that the device supports auto-negotiation or fixed speed settings as appropriate.