OMP 60" Edge 540 ARF - Red 1,52m

OMP 60" Edge 540 ARF - Red 1,52mOMP 60" Edge 540 ARF Red 1,52m ARTF semiscale kit of 3D aerobatic aeroplane (1,524 mm wingspan) for 1,200 1,600W brushless motor with 8S LiPo. Extremely light, Kevlar carbon composite reinforced balsa plywood airframe, lots of carbon parts. A semi scale model of the American aerobatic aeroplane for 1,200 1,600 W brushless electric motor for experienced pilots capable of the classic pattern as well as extreme 3D style. The fuselage is of now classic

• OMP 60" Edge 540 ARF - Red 1,52m
• ARTF semiscale kit of 3D aerobatic aeroplane (1,524 mm wingspan) for 1,200-1,600W brushless motor with 8S LiPo. Extremely light, Kevlar®/carbon composite reinforced balsa/plywood airframe, lots of carbon parts.

  
  

  A semi scale model of the American aerobatic aeroplane for 1,200-1,600 W brushless electric motor for experienced pilots capable of the classic pattern as well as extreme 3D style.

  The fuselage is of - now classic - ultra light design featuring balsa and plywood Kevlar®/carbon composite reinforced parts, detachable fibreglass cowl and large fuselage/canopy hatch allowing perfect access to the entire power system and RC gear. The engine or motor is to be fitted to a plywood/composite reinforced box using a radial mount.

  The two-piece all-balsa wing with a symmetrical airfoil uses a carbon tube joiner; the wing halves are secured with screws to the fuselage. The large ailerons are controlled by a single servo each. You can install the supplied SFG winglets to the wing tips.

  The empennage is a light all-balsa work; the horizontal tailplane is a single-piece, glued into the fuselage. The elevator and rudder are controlled by servos installed in the tail part of the fuselage.

  The entire model is covered by the ULTRACOTE® iron-on film (ULTRACOTE® is the trade mark for the ORACOVER® film used in the USA.)

  The main undercarriage features carbon composite legs, fibreglass spats and lightweight wheels; the tail wheel with a carbon bracket is coupled with the rudder.

  You will need 1,200-1,1600 W brushless electric motor , 80-100 A ESC and 30C 3,300-4,000 mAh 6S LiPo pack.

  You will need at least 4-channel RC set to control your Edge 540 but 6-channel computer radio i preferred - the precise set-up of servos, optimized dual and exponential rates is the must for aerobatic flying - the pattern as well as extreme 3D.

  You will need 4 fast and strong digital mini servos.

  The ARTF kit contents: Oracover® covered fuselage, wing and tailplane, painted fibreglass cowl, carbon undercarriage, tail wheel assembly, wheels, set of accessories and instruction manual.

  Wing span [mm]	1524
  Length [mm]	1500
  Wing surface [dm2]	42.3
  Weight [g]	2750 - 2850