Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 15 - Jul 20
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
G-Floor Small Coin 7.5 ft. x 17 ft. Slate Grey Commercial Grade Vinyl Garage Flooring Cover and ProtectorSmall Coin Slate Grey Vinyl Garage Floor Mat, 7. 5 x 17 ft Commercial grade G Floor roll out mat protects garage floors with a tight Small Coin tread that boosts traction and delivers a clean, professional look. Made of 100% solid polyvinyl, it resists chemicals, moisture, and heavy vehicle traffic while installing easily by rolling out and trimming to fit. Key Features: Heavy Duty Polyvinyl: 100% solid vinyl construction resists oil, battery acid,
Small Coin Slate Grey Vinyl Garage Floor Mat, 7.5 x 17 ft
Commercial-grade G-Floor roll-out mat protects garage floors with a tight Small Coin tread that boosts traction and delivers a clean, professional look. Made of 100% solid polyvinyl, it resists chemicals, moisture, and heavy vehicle traffic while installing easily by rolling out and trimming to fit.
Key Features:
- Heavy-Duty Polyvinyl: 100% solid vinyl construction resists oil, battery acid, road salt, and wear.
- Small Coin Traction: Compact raised coin pattern improves grip while allowing smooth rolling of toolboxes and equipment.
- Easy DIY Install: Roll out and trim to size; optionally tape or glue edges for a permanent fit.
- Low Maintenance: Waterproof surface cleans with sweeping, mopping, or rinsing.
- Sized for Vehicles: 7.5 ft x 17 ft mat protects parking areas and walkways in garages and shops.
Specifications Table:
| Specification | Details |
|---|---|
| Color | Slate Grey |
| Size | 7.5 ft x 17 ft (7'6" x 17') |
| Material | 100% solid polyvinyl |
| Pattern | Small Coin tread; raised circles 0.75 in diameter, ~0.030 in relief, spaced 0.125 in apart |
| Thickness | 60 mil base; 90 mil overall (approx. 3/32 in) |
| Surface Texture | Compact coin texture for traction and smooth rolling of equipment |
| Installation | DIY roll-out; trim to fit; optionally secure with tape or adhesive |
| Maintenance | Sweep, mop, or rinse |
| Chemical/Weather Resistance | Resists oil, battery acid, road salt, and moisture |
| Country of Manufacture | Made in USA |
Frequently Asked Questions (FAQ):
Q: What is the thickness?
A: Approx. 60 mil base with 90 mil overall height (about 3/32 in).
Q: What material is it made from?
A: 100% solid polyvinyl (not layered or foam-filled).
Q: How do I install it?
A: Clean the floor, roll out the mat, let it acclimate, trim as needed, and optionally secure edges with tape or adhesive.
Q: Is it slip-resistant?
A: Yes, the raised Small Coin texture enhances traction.
Q: How do I clean it?
A: Sweep, mop, or rinse with water and mild cleaner.
Refined Traction, Industrial Poise
This sleek Small Coin surface brings tailored texture to the garage, turning a utility zone into a polished workspace. The compact, rhythmic coin pattern catches the light while grounding the room with durable, commercial-grade vinyl. Float a workbench above its graphite sheen and layer matte black cabinetry for a cohesive, performance-driven palette. It’s a luxe foundation that elevates everyday living with effortless practicality.
Protect and polish your garage in minutes—roll out G-Floor Small Coin and enjoy durable, slip-resistant performance today.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 545 reviews
Sort
Product Reviews
★★★★★ 5
Attractive
Size: 4 Panel-88'', Color: Grey
The assembled product is just as described. The screens look great! I am using them to hide the cluttered shelving in my garage. The area now looks quite neat Something I must say, though, is that the assembly was extremely difficult. I had to use a silicone spray and some pounding to get the A and B poles to fit together. Also, it required a great deal of strength to stretch and hold the fabric panels so that the bars inserted in each hem lines up with the screws inserted in A/B poles. I strongly recommend having a partner to help with the assembly.
while sc and screw into poles them once inserted intetchedtne end of each pole ( and B poles barely fit together. I used silicone spray on the end and then pounded them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 12, 2025
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Versatile Room Divider With Easy Assembly and Strong Coverage
Size: 3 Panel 12FT W
I picked up this Siebwin 3-panel folding room divider mainly for privacy and room separation, and overall it works very well.
Assembly is very straightforward, and the divider can be set up, taken apart, and stored without much effort. The fabric quality feels good, and the frame construction is stronger and more stable than expected. The support tubes especially feel well built and help keep the divider standing securely.
One feature I really liked is the flexibility of the design. The panels can be used together as a complete divider or separated depending on the setup and available space. That makes it much more versatile for different room layouts or temporary privacy needs.
The coverage is also very good, and the size matches the manufacturer’s description accurately. The fabric blocks light and background visibility well enough to provide solid privacy without feeling overly heavy. The wider feet also help improve stability compared to thinner folding dividers.
Another positive detail is that everything arrived complete with no missing parts or damaged pieces, which made assembly much easier and faster.
Compared to cheaper privacy screens, this one feels more durable and easier to customize depending on the situation. In terms of value for the money, it feels like a very practical and worthwhile purchase considering the size, flexibility, and build quality.
Overall, a versatile and well-built room divider with easy assembly, strong privacy coverage, stable construction, complete included parts, flexible panel configuration, and excellent everyday functionality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026