Blackmagic Design Pocket Camera 6K/4K Battery Grip (batteries not included)

Blackmagic Design Pocket Camera 4K/6K Battery Grip

The Blackmagic Design Pocket Camera 4K/6K Battery Grip is a specialized power accessory designed specifically for the original Pocket Cinema Camera 4K and the original Pocket Cinema Camera 6K (EF).

Unlike the "Pro" version mentioned previously, this grip is designed for cameras that use the LP-E6 battery standard. It solves the most common complaint regarding these cameras: the relatively short battery life of the internal LP-E6 cells.

Core Functionality

• Extended Power: The grip allows you to use two Sony L-Series (NP-F550/570) batteries instead of a single LP-E6. This extends your shooting time from roughly 45 minutes to over 2 hours on a single charge.

• Direct Communication: Because it connects via the battery well, the camera can monitor the voltage of the L-series batteries directly, showing you the power levels on the main 5-inch touchscreen.

• In-Camera Charging: If you plug the camera into AC power using the 2-pin locking connector, the grip will charge the batteries inside it while the camera is not in use.

Ergonomic Design

• Carbon Fiber Composite: Matches the exact material and finish of the Pocket 4K and 6K, making it feel like a native extension of the camera body.

• Unique "Long" Design: Unlike traditional vertical grips for DSLRs, this grip extends the width/length of the handgrip. This provides a much larger surface area for your right hand, making the camera significantly easier to hold when using heavy cinema lenses.

• Battery Door Storage: It features a dedicated slot to store the camera’s original battery door, so it doesn't get lost while the grip is installed.

Technical Specifications

Important Compatibility Warning

This specific grip is not compatible with the Pocket Cinema Camera 6K Pro or the 6K G2. Those cameras have a physically different body shape and use a different battery internal architecture.

• Use this grip for: Pocket 4K and original Pocket 6K (the one with the standard non-tilting screen).

• Use the "Pro Grip" for: Pocket 6K Pro and 6K G2 (the ones with the tilting/HDR screens).

Operational Insight (2026)

In 2026, this grip is the go-to solution for filmmakers using the Pocket 4K on a gimbal or as a "B-Cam." By moving to the NP-F570 batteries, you get a much more reliable power source than the old LP-E6 cells, which were prone to sudden voltage drops.

Pro Tip: If you are using a camera cage, you will likely need to remove the "bottom" part of your cage or purchase a half-cage to accommodate this grip, as it adds significant height and width to the camera's base.

Are you planning to use this with genuine Sony batteries or third-party NP-F570s? (The camera's battery percentage readout is usually more accurate with genuine or high-end third-party cells).