SKU: 50158048637

iFlight Proxima Cinelifter Frame Kit

$516.15 $573.50
Save 10%
No.2 Bestseller on alleghenybetterhealth.org >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 15 - Jul 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

iFlight Proxima Cinelifter Frame KitProxima stands as the latest innovation from the collaborative efforts of 2RAW & IFLIGHT Cinema range, boasting a compact 6 inch x8 form factor. This cutting edge product is tailored to accommodate box cinema cameras such as the RED Komodo. With its unique track design, meticulously engineered to minimize vertical height while ensuring the weight distribution remains centralized. This configuration not only enhances manoeuvrability but also

Proxima stands as the latest innovation from the collaborative efforts of 2RAW & IFLIGHT Cinema range, boasting a compact 6-inch x8 form factor. This cutting-edge product is tailored to accommodate box cinema cameras such as the RED Komodo. With its unique track design, meticulously engineered to minimize vertical height while ensuring the weight distribution remains centralized. This configuration not only enhances manoeuvrability but also facilitates navigation through confined spaces. Furthermore, Proxima's fully shielded props mitigate the risk of inadvertent contact during close-proximity filming, making it an ideal choice for capturing daring cinematic shots.

Check Out all our Cinelifters and related Accessories as well as the rest of our IFlight Products!

Recommended Props: GEMFAN 6*4.5*3 propellers / HQProp D6x4.5x3
Recommended Battery: Gens Ace 5500mAh 6s 22.2V 60C Long Range/Cinelifter Lipo

Features:

  • Advanced Track Design

Proxima implements a distinctive track motor mount system, strategically designed to achieve a closer alignment between the center of gravity and the center of mass. This innovation not only enhances maneuverability but also contributes to the compactness of the drone. Employing precision-engineered Aluminum CNC Truss structures, the mount ensures robust support for the motors across all axes.

  • Camera Mount

Crafted from CNC Aluminum and ultra-light carbon materials, the camera mount on Proxima facilitates seamless camera adjustments, catering to the dynamic requirements of film sets. Additionally, the mount features a vibration isolation rubber plate, effectively dampening high-frequency vibrations between the drone and the camera, thereby ensuring optimal filming conditions.

  • MultiJet Fusion Shell

In line with the hallmark quality of 2RAW products, Proxima boasts a MultiJet fused shell that runs along its tracks. Not only does this shell house the LED system, but it also conceals cabling, imparting a polished and professional aesthetic essential for client-facing applications.

  • Dependable Electronics

Reliability is paramount, especially in scenarios where failure is not an option. Proxima incorporates a bespoke electronics package, engineered for simplicity and reliability. Utilizing state-of-the-art chips and advanced electrical noise filtration, it delivers unparalleled performance. Moreover, a dedicated shielded UBEC with reverse voltage and spike protection powers the cinema camera and facilitates video feed transmission directly from the drone, minimizing risks.

  • Protected Propellers

Proxima's fully shielded propellers provide comprehensive protection from all directions, ensuring safe operation around delicate subjects. Even in the event of a collision, the risk of causing serious injury is significantly mitigated compared to traditional open-prop drones.

      Specifications:

      • Product Name: Proxima Cinelifter Frame
      • Wheelbase: 262mm
      • Frame Dimension: L200*W170*H112 mm
      • Arm Thickness: 3mm
      • Bottom Plate Thickness: 3mm
      • Top Plate Thickness: 3mm
      • Max Flight Stack Height: 28mm
      • Max VTX Height: 28mm
      • Flight controller Mounting: 30.5*30.5/Φ3mm
      • VTX Mounting: 20*20/Φ2mm / 25.5*25.5/Φ1.6mm
      • Motor Mounting: 19*19/Φ3mm
      • Weight: 1095g
      • Recommend Motor: 28xx Motor

      Package Includes:

      • 1 x Proxima Frame Kit
      • 1 x TPU Set
      • 4 x Battery Anti-slip pads
      • 1 x Screw Bag
      • 1 x XT90E-Male Plug
      • 1 x XT30U-Female Plug
      • 1 x XT60 Male to XT30 Female Adapter Wire
      • 4 x Lipo Strap 20*300mm
      • 2 x Lipo Strap 20*400mm
      • 2 x Lipo Strap 20*500mm
        Note : Due to manufacturing processes, the thickness of our products may have a standard manufacturing tolerance of ±0.2mm. The size of the hole may have a standard manufacturing tolerance of ±0.1mm.
        Shipping Notes
        • Free Standard Shipping on $100+ Orders to the USA.
        • Except Preorder products are shipped in 48 hours.
        • Delivery to the USA:
        1. Standard Shipping : 3-10 business days
        • If time is of the essence, please consider selecting expedited delivery for faster service.
        Exchange/Return Notes
        • We offer a 30-day return/exchange service after receiving.
        • Final sale items are not eligible for returns or exchanges.
        • To process your return/exchange, please contact us at [email protected]
        • Please click here for more details>>> Return & Exchange Policy
        SKU: 50158048637

        Discover Niche Categories That Outsell

        Top-Converting Item to Boost Your Average Order

        4.5 ★★★★★
        Based on 2279 reviews
        Sort
        Highest Rating
        Newest First
        Oldest First
        Product Reviews
        S
        Verified Purchase
        sunshine
        Bozeman, US
        ★★★★★ 5
        Easy of use.
        Easy to use for edging driveway. I am not a professional and a senior who is learning to take care of my yard.
        WAS THIS REVIEW HELPFUL?YesReportShare
        Reviewed in the United States on April 16, 2026
        M
        Verified Purchase
        Movie Fan
        Omaha, US
        ★★★★★ 3
        Nice Edger as long as the blade doesn't come loose -- and it will come loose, repeatedly!
        Probably could've/should've rated this 2 stars yet it works well when it works. I purchased this edger to edge my drive and sidewalks and not for trenching. The edger arrived very quickly after I ordered it (I am not a Prime member so this was a nice surprise). Assembly was easy and straight-forward. The first use went smoothly and the edger performed flawlessly and provided clean, smooth edging. About 20 minutes into the second use I noticed that the edger was cutting and quickly determined that the blade was spinning freely -- fortunately the hex nut was still attached to the threaded shaft. I reviewed the manual that came with the edger, grabbed the correct sized socket and torque wrench. I removed the hex nut, the first washer, the blade and then the second washer. To install I followed the directions ensuring that the flats of the washer aligned with the flat on the shaft and tightened the hex nut to the specified 140 in-lbs. The edger worked well for about 10 minutes and the blade once again became loose. This time I replaced the original blade (which did not need to be replaced from a wear perspective) with a new B&D blade and new washers. Once again I followed the instructions and this time the edger performed flawlessly until about 5 minutes remaining in my edging when once again the blade came loose. my experience has most certainly been frustrating to say the least. one should not need to carry a socket and torque wrench with them and repeatedly need to tighten the blade. So, when the edger performs as intended it does an excellent job at edging; however I have no confidence that this edger will be able to perform as intended throughout repeated uses and more importantly has shown that it cannot complete my edging without requiring tightening the blade (which requires disassembly down to the second keyed washer). Potential buyers should be prepared for this experience and make your decision accordingly. Note: I tried contacting black and decker via twitter (@blackdeckerhome) and never received a response; I could not find a separate customer service/support twitter account. Trying to contact customer service via the phone these days is an exercise in patience to say the least.
        WAS THIS REVIEW HELPFUL?YesReportShare
        Reviewed in the United States on November 11, 2022
        C
        Verified Purchase
        Christopher
        Fort Morgan, US
        ★★★★★ 5
        Great edger for home use
        This WORX 12 Amp Electric Lawn Edger did exactly what I needed it to do. It was easy to use, had plenty of power for cleaning up the edges around my driveway and sidewalk, and gave the yard a much cleaner, finished look. I like that it is corded because I do not have to worry about batteries dying, and it has enough power for regular homeowner use. The first pass took a little extra time since the edges needed cleaned up, but once I got going, it worked great. Overall, this is a solid edger/trencher for the price, and I would definitely recommend it for anyone wanting cleaner lawn edges without dealing with gas.
        WAS THIS REVIEW HELPFUL?YesReportShare
        Reviewed in the United States on May 29, 2026
        R
        Verified Purchase
        rmkd
        Houston, US
        ★★★★★ 5
        Little work horse!
        I LOVE the look of an edged sidewalk. After a few calls to some local landscape companies, I couldn't find anyone with an edger. Crazy! So I bought myself this one! Super easy to put together and just as easy to use. My walk hasn't been edged for many years and was very overgrown. I was nervous that I wouldn't be able to run this thing, but this little work horse did the job for me and did it perfectly. It will be super easy to keep it edged now. Extremely happy with this purchase.
        WAS THIS REVIEW HELPFUL?YesReportShare
        Reviewed in the United States on June 1, 2026
        B
        Verified Purchase
        B. Colonna
        Lexington, US
        ★★★★★ 4
        Takes The Edge Off!
        This is a decent product. If you are going to do a lot of edging, or want to do deep trenching to run conduit, etc. this is NOT the product you want. It is electric, so you are tethered to an outlet, and of course, the farther you go on extension cords, the less of the 12 amp juice you get. It also trenches to 1 1/2", which is OK, but not enough to dump conduit, etc. That said, this is a very good edger. Out of the box, it is minimal assembly. You connect the three pieces of the shaft, removing some edge tape from it, and inserting two metal bolts and plastic knobs, similar to most lawn mowers these days. Then you install the plastic handle with another bolt. That's it. For use, you have a lever which you pull up for edging and lower for trenching to adjust the group clearance. You also choose 1", 1/4", or 1 1/2" depth. Then you plug it in. There is a white line on top of the blade cover so you know where the blade is. You just pull the trigger to run the blade, or release the trigger to stop the blade. Be careful not to lose sight of your electric cord so you don't hit it! I edged along my driveway, about 50' on each side, as well as my front of my lawn, so another 85' along the lawn and the apron (both sides). That's over 350'. It cut through the grass and dirt easily. It struggled a couple of times, on some tough mounds of grass, but like any other tool, you don't force it when that happens, just back up and do that area again slowly. If you come too close to blacktop, Belgian block, stone, etc. you will see sparks so you will know. Just keep in mind, this is an edger. You will be left with the severed grass/sod to remove. In my case I was loooong overdue for a edging, so I spent a long time scraping the sod off the pavement with a shovel. I expect with more frequent ending, and now working with a cleaner edge, this will be less of an issue. Either way, that is not on the product, but the state of the lawn. The edger has 2 read wheels and one smaller front wheel so , although this is not like a big, gas-powered curb jumping unit, you have the option of attacking a curb edge from either the blade side or other side of the edger, so you can get real close to a Belgian block curb. I also did the edge where my grass meets my mulched flower bed, but that was more of a trimming than a edge removal. Overall, the Work edger did as good, or better, a job than my string trimmer, and I didn't have to stop every few minutes to rewrap string. Plus it trenched enough to give me a definitive edge, whereas the string edger just cuts into the grass, not a real trench.
        WAS THIS REVIEW HELPFUL?YesReportShare
        Reviewed in the United States on September 28, 2020

        recommand products

        Kingston Memory KF552C40BB-16 16GB 5200MHz DDR5 CL40 DIMM FURY Beast Black Retail
        61.99
        MOLLE Multi-Purpose Utility Pouch - by Bombshell Gear
        23.75
        Polaris General 1000 GP Rack (General Purpose) - by Razorback Offroad
        549.50
        ASUS Fan ROG STRIX LC II 240 All-In-One Liquid CPU Cooler 240mm Radiator Retail
        103.49
        Race Front Bumper for RZR - by Dragonfire
        102.50