Mikado Backup Mini 3x25F VBar Control 05588

Mikado Backup Mini 3x25F VBar Control 05588Mikado Backup Mini 3x25F VBar Control 05588 Benefits at a glance automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs) all voltages can be monitored separately via telemetry charging currents are adjustable, both for initial charging and for topping up during operation recharges automatically and immediately whenever needed companion App warns the pilot whenever the backup is used

• Mikado Backup Mini 3x25F VBar Control  05588

• Benefits at a glance

  • automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
  • all voltages can be monitored separately via telemetry
  • charging currents are adjustable, both for initial charging and for topping-up during operation
  • recharges automatically and immediately whenever needed
  • companion App warns the pilot whenever the backup is used
  • this unit ensures the everyday operation of your valuable models

  Hardware features

  • wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
  • Capacity 3x 25F
    
  • 20+ A peak current
  • short circuit protection
  • fast charge (adjustable) up to 2.4 A
  • charging current is ramped up slowly, to protect main power supply
  • decoupled channels for power delivery and for charging
  • VLink Telemetry monitoring and control
  • no r/c channel (servo connector) must be sacrificed, pass-through via main connector
  • active balancer between capacitors for low idle discharge
  • up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
  • telemetry input for other sensors or ESCs (daisy-chaining)

  Specifications
  Power Supply	3-12.6 V (3s LiPo), max. 16 V, 25F
  Dimensions	approx. 28 x 55 x 19 mm (H x W x D)
  Weight	approx. 33 g including wires
  Power Rating	20+ A peak
  Device
  Connecting Wire
  Miscellaneous
  Miscellaneous	Update VBar NEO, install companion App on transmitter

  
  

  Contents

  VBar Control Backup Mini with power wire, manual

  Telemetry wire included